Replace Microwave bulb?

psarinuk · 24 April 2007 at 2:06PM

Hi,
I've a silver-grey Pacific digital microwave which has been rarely used, works and looks brand new. Recently the light bulb inside the microwave went off, leaving it dark inside. However, the micro is working normally with all the bits like digital timer, strength etc workingproperly.

I am trying to find a way to replace the bulb. There is no openeing inside from where I can access the bulb. Also the screws at the back don't lead to anywehere close to bulb.

Does anyone know how to replace this bulb or is it just impossible?

Thanks..

mistry_2 · 24 April 2007 at 2:41PM

I'd get the model number and ring the manufacturer, they should be able to tell you

timread · 24 April 2007 at 7:25PM

If it's anything like my Panasonic microwave, the bulb is inaccessible by mere mortals, and according to the manual needs to be taken to a Panasonic Service Centre to get the bulb changed. No doubt at great cost.

Which is why I haven't bothered

Teebo_2 · 26 April 2007 at 2:35PM

The bulb will be a standard SES (small eddison screw) type, available in most supermarkets and electrical stores very cheaply. Howver, the only way you can get to it is by removing the outer cover.

A word of caution - microwave ovens contain a very large capacitor; think of it as a 2000 volt battery. Even after unplugging the oven, a number of components will still be live and at a voltage high enough to kill you. This is why manufacturers don't usually supply internal spares.

If you are confident (and competent) with electrics then it's an easy job but do be very careful and if in any doubt take it to an electrical repairs shop.

T.

Replace Microwave bulb?

Comments

Confirm your email address to Create Threads and Reply

🚀 Getting Started

Categories

Is this how you want to be seen?

Get our FREE Weekly email full of deals & guides - and it’s spam-free