Kitchen Splashback Issue
Options
Hilts100
Posts: 11 Forumite
We have had the kitchen ripped out and the new one is going in. The wall space under the wall units down to the base units has had all the tiles knocked off leaving the wall with lots of plaster missing and in some places back to the breeze block. We wanted the wall re-plastering. We have been told that as we are having a full length glass splashback it doesn't need it and that the adhesive sticking the splashback on the wall will be good enough and we won't see any of the inferior wall behind.
Is this acceptable and normal practice.
Tried to post some pics but cant do it.
Thanks
Is this acceptable and normal practice.
Tried to post some pics but cant do it.
Thanks
0
Comments
-
If the splash back isn't see through then they are right, no point in plastering the wall.
Plastering a wall is for decorating purposes, the splash back does away with this as its a finished surface.0 -
If it's back to breeze block, I wouldn't be happy to cover it with a splashback.
There's usually tiling adhesive left on the walls too, so I expect it's all a bit of a mess back there and not a good based for something like glass.
I would expect at least a bonding coat to fill the gaps.Everything that is supposed to be in heaven is already here on earth.
0 -
Doozergirl wrote: »I would expect at least a bonding coat to fill the gaps.
Yup. Slap a bit of bonding plaster on to give a level surface. It doesn't need to be a smooth polished finish. What you don't want is lumps of old plaster or tile adhesive up against the glass - These would be pressure points that would result in the glass cracking if it were subjected to any knocks. If you were really unlucky, heat from the hob coupled with a pressure point could lead to cracking.
You have one chance to do it right.Her courage will change the world.
Treasure the moments that you have. Savour them for as long as you can for they will never come back again.0 -
Is it an outside wall? If so, would you not like it to be insulated?0
-
Just had our kitchen done and was also a mess where the tiles had been taken off.
The fitter mixed up some sort of white plaster. When it was dry he gave it a sand down and then fitted the acrylic splashback.0 -
pinklady21 wrote: »Is it an outside wall? If so, would you not like it to be insulated?0
-
Just had our kitchen done and was also a mess where the tiles had been taken off.
The fitter mixed up some sort of white plaster. When it was dry he gave it a sand down and then fitted the acrylic splashback.
How do you like the Acrylic splashback, is it full lengh along the wall and is that heat resistant behind the hob ?0
This discussion has been closed.
Categories
- All Categories
- 343.3K Banking & Borrowing
- 250.1K Reduce Debt & Boost Income
- 449.7K Spending & Discounts
- 235.3K Work, Benefits & Business
- 608.1K Mortgages, Homes & Bills
- 173.1K Life & Family
- 248K Travel & Transport
- 1.5M Hobbies & Leisure
- 15.9K Discuss & Feedback
- 15.1K Coronavirus Support Boards