Luxpowertek monitor

Hi I have just looked at the luxpowertek monitor app with a view to tweaking one of the settings in the maintenance section. It is not something I need to do very often so I always have to think about the procedure. I do know that you have to click the "Read" button to display your current settings. But for some reason when I do this nothing happens. On my laptop an unauthorised action icon appears, and on my tablet I get this " Read..." any Ideas? I have looked on YouTube but no luck.

Comments

  • Dave_Fowler
    Dave_Fowler Posts: 622 Forumite
    Part of the Furniture 500 Posts Name Dropper
    Mine's the same.  Nothing unusual for Luxpower, they always seem to have a problem with the server.  All other pages are workimg correctly. Just 'Maintenance' has a problem.  The app on Android is working fine on all pages.
    Solar PV System 1: 2.96kWp South+8 degrees. Roof 38 degrees. 'Normal' system
    Solar PV System 2: 3.00kWp South-4 degrees. Roof 28 degrees. SolarEdge system
    EV car, PodPoint charger
    Lux LXP 3600 ACS + 6 x 2.4kWh Aoboet LFP 2400 battery storage. Installed Feb 2021
    Location: Bedfordshire
  • Bobjl
    Bobjl Posts: 14 Forumite
    10 Posts First Anniversary
    Mine's the same.  Nothing unusual for Luxpower, they always seem to have a problem with the server.  All other pages are workimg correctly. Just 'Maintenance' has a problem.  The app on Android is working fine on all pages.
    That's encouraging. The energy overview isn't working either. I will have a look at the app on android. All I wanted to do is reduce the ac charging duration on low tariff as it is only takes an hour to get my battery up to full charge this time of year.
  • Dave_Fowler
    Dave_Fowler Posts: 622 Forumite
    Part of the Furniture 500 Posts Name Dropper
    Bobjl said:
    Mine's the same.  Nothing unusual for Luxpower, they always seem to have a problem with the server.  All other pages are workimg correctly. Just 'Maintenance' has a problem.  The app on Android is working fine on all pages.
    That's encouraging. The energy overview isn't working either. I will have a look at the app on android. All I wanted to do is reduce the ac charging duration on low tariff as it is only takes an hour to get my battery up to full charge this time of year.
    PC version up and running again this morning for my account. 
    Solar PV System 1: 2.96kWp South+8 degrees. Roof 38 degrees. 'Normal' system
    Solar PV System 2: 3.00kWp South-4 degrees. Roof 28 degrees. SolarEdge system
    EV car, PodPoint charger
    Lux LXP 3600 ACS + 6 x 2.4kWh Aoboet LFP 2400 battery storage. Installed Feb 2021
    Location: Bedfordshire
  • EricMears
    EricMears Posts: 3,300 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    My PC version was playing up over the weekend.  Was showing results from an hour or more earlier and refresh didn't help.  Switching to config page & refreshing dongle sometimes fixed it but often as not just logged out (but fine for a while after logging back in).    Seems OK this morning

    Mobile app was unaffected.
    NE Derbyshire.4kWp S Facing 17.5deg slope (dormer roof).24kWh of Pylontech batteries with Lux controller BEV : Hyundai Ioniq5
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350K Banking & Borrowing
  • 252.7K Reduce Debt & Boost Income
  • 453.1K Spending & Discounts
  • 243K Work, Benefits & Business
  • 619.9K Mortgages, Homes & Bills
  • 176.5K Life & Family
  • 255.9K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.