We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Solar panels working at night?
Options
Krakkkers
Posts: 1,295 Forumite
My panels are still outputting 28w right now, any idea what the problem is?
Clearly they are not generating so why is my Geo monitor saying they are?
I have had my panels for 7 years and have never seen this before and this is at the same time as another problem with my iboost which is reading 400w higher than my recorded generation. Some weird stuff going on after 7 years of no problems.
Clearly they are not generating so why is my Geo monitor saying they are?
I have had my panels for 7 years and have never seen this before and this is at the same time as another problem with my iboost which is reading 400w higher than my recorded generation. Some weird stuff going on after 7 years of no problems.
0
Comments
-
Should add that the Geo monitor tallies perfectly with the generation meter.0
-
What type of geo monitor have you got - clamp or led pulse?4kWp (black/black) - Sofar Inverter - SSE(141°) - 30° pitch - North LincsInstalled June 2013 - PVGIS = 3400Sofar ME3000SP Inverter & 5 x Pylontech US2000B Plus & 3 x US2000C Batteries - 19.2kWh0
-
its an led pulse. the iboost works from a clamp.
0 -
Sounds like a potential inverter issue to me.
Power the inverter off with the isolator and see if the wattage disappears, if not, its not the inverter.
Iboost could be picking up interference as its a clamp, maybe move it further along the cable and secure by tie wraoa either side on the cable so it can't slip back downWest central Scotland
4kw sse since 2014 and 6.6kw wsw / ene split since 2019
24kwh leaf, 75Kwh Tesla and Lux 3600 with 60Kwh storage1 -
I have a geo monitor on a led counter with a samil inverter some times at night it signals maximum power for a second . wondered why but not really a problem thought it could be interference with the wifi signal0
-
Have you checked the Velcro to make sure the sensor isn’t peeling off?paul991 said:I have a geo monitor on a led counter with a samil inverter some times at night it signals maximum power for a second . wondered why but not really a problem thought it could be interference with the wifi signal4kWp (black/black) - Sofar Inverter - SSE(141°) - 30° pitch - North LincsInstalled June 2013 - PVGIS = 3400Sofar ME3000SP Inverter & 5 x Pylontech US2000B Plus & 3 x US2000C Batteries - 19.2kWh0 -
Seems OK and have put new batteries in.0
-
yes sensors ok and was in a dark room any way but by geo monitor has now been knocked off the table so now looking for a replacement . im looking for a basic monitor that works from a led sensor ,has to be cheap and idealy easy for the wife to read0
-
I occasionally get low level generation in the dark on my geosolar monitor. It has mystified me for 7 years.16 Panel (250W JASolar) 4kWp, facing 170 degrees, 40 degree slope, Solis Inverter. Installed 29/9/2015 - £4700 (Norfolk Solar Together Scheme); 9.6kWh US2000C Pylontech batteries + Solis Inverter installed 12/4/2022 Year target (PVGIS-CMSAF) = 3880kWh - Installer estimate 3452 kWh:Average over 6 years = 4400 :j0
-
I switched the solar off and on at the fuse box and it has not happened again.
Still got a difference between the iboost and clamp and what the generation is.0
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 351.1K Banking & Borrowing
- 253.2K Reduce Debt & Boost Income
- 453.7K Spending & Discounts
- 244.1K Work, Benefits & Business
- 599.2K Mortgages, Homes & Bills
- 177K Life & Family
- 257.5K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards