Learn a trade: plastering

Hi

Last year I attended a 4 day course to learn how to plaster, I did this mainly for the purpose of using the skills on my own house. Anyway, since doing the course I have taken a few jobs at weekends and the cost of the course has been made back many times.
«1345

Comments

  • Steve_xx
    Steve_xx Posts: 6,979 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    That's interesting. How much was the course? Are they available nationally? I'd like to be able to plaster properly. I can do small areas reasonably well, but would like to learn the art.
  • save-a-lot
    save-a-lot Posts: 2,809 Forumite
    1,000 Posts Combo Breaker
    Hi

    All together, including hotel accomodation I paid £350 (I think that sounds right - in 2006) I went to a place in North Manchester, the elite school of plastering

    http://www.tesop.co.uk/plastering/

    just doing a google search shows that there are loads of places doing this....
    http://www.google.co.uk/search?hl=en&safe=off&q=plastering+courses&btnG=Search&meta=

    It has definately paid for itself, even if I had just done my own jobs within my house it would have still paid for itself. I have done a few jobs for friends and work colleagues, so the course paid for itself completely and then some.
  • Steve_xx
    Steve_xx Posts: 6,979 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    Thanks for the information - most interesting. I'll look further into your suggestion, thanks.
  • nelly_2
    nelly_2 Posts: 17,863 Forumite
    10,000 Posts Combo Breaker
    Steve_xx wrote: »
    Thanks for the information - most interesting. I'll look further into your suggestion, thanks.

    Try this one, the lad who runs this site is genuinely interested in teaching people to plaster rather then just take peoples cash on a half @rsed course.

    Ive read what he says and hes good and knows his stuff, and I know what I'm on about ive been a plasterer for 20 odd years

    http://ukspreads.co.uk
  • save-a-lot
    save-a-lot Posts: 2,809 Forumite
    1,000 Posts Combo Breaker
    Nelly - the course I went on was a good one - not half @rsed or run by money-grabbing cowboys either. Your post implies that my recommendation is no good, well I benefitted from it and over those 4 days I learnt a new skill. Obviously afterwards practice is required, but the course brought me to a decent standard.

    What makes this half-@rsed then?
  • withabix
    withabix Posts: 9,508 Forumite
    nelly wrote: »
    ive been a plasterer for 20 odd years

    Spot the blerk with lots of dosh ;)
    British Ex-pat in British Columbia!
  • medical
    medical Posts: 379 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    this is really good. i would like to learn somthing like interior decorating or plumbing etc
    medical
  • nelly_2
    nelly_2 Posts: 17,863 Forumite
    10,000 Posts Combo Breaker
    save-a-lot wrote: »
    Nelly - the course I went on was a good one - not half @rsed or run by money-grabbing cowboys either. Your post implies that my recommendation is no good, well I benefitted from it and over those 4 days I learnt a new skill. Obviously afterwards practice is required, but the course brought me to a decent standard.

    What makes this half-@rsed then?

    Sorry never meant to come across that way at all mate!

    I am just aware that a lot of these courses are a way to make money predominantly rather then to teach.

    And I applaud people who have the nounce to get off their @rse and try to better themselves/learn something new.

    Its just I have been called to houses where the owner has had bad jobs done by people passing themselves off as tradesmen when they were clearly not, and that reflects on me and my trade and my industry as a whole.

    The building trade has a bad image enough without this latest fad, and I take a lot of pride in my skill and my willingness to do a good job.

    www.myplasterer.com <---- thats me!

    I work for many people who have no clue who I am, so I made that to settle their minds that they are getting a decent tradesman.

    Didnt mean to offend mate, you'd have know if I did cos I'm ace at offending:rotfl:
  • save-a-lot
    save-a-lot Posts: 2,809 Forumite
    1,000 Posts Combo Breaker
    No worries Nelly and I recognise all the concerns you raise about people using these courses as a way to make a quick buck without really detailing the quality in their jobs.

    Yeah, seen your website before and the video clip is spot on, and I am sure I have seen your van around (but that might be the fact that I have seen your website before).

    I guess those who want to follow up on the training owe it to their future customers to practice the skills they have learnt somewhere where it does not effect anyone, i.e. own home, accomodating friends and relatives. Personally, I have done some work at home, for my B-I-L at his house and my sisters for the cost of the materials. All of those were happy so have now done work for work mates. All happy aswell.
  • This is a great idea, I've always fancied tiling meself...

    Best way to find a course for this? Night school?
    Piggypoints - 207+£10 * Quidco - £95 * Tesco - 1095 * Sainsbugs - 4237
    :DI SHALL be debt free!!!!!:D
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.8K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.8K Work, Benefits & Business
  • 619.6K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.