Cut my hedge cutter power cable, who fixes them?

FUNKYDADDIO

Hi guys, had the misfortune of cutting the power cable when cutting the hedges. Anyone know anywhere which can fix? It's about 1 metre from handle.. Cheers .

Owain_Moneysaver

If you don't mind having the bulge in the cable you can join the two ends with this

http://www.screwfix.com/p/masterplug-orange-connector-2-pin/46232

The half with pins goes on the hedgecutter and the half with holes goes on the mains side.

warmhands.coldheart

^^^^^ Would suggest the same myself... Top money saving tip :money:

roddydogs

Bare the wires & twist together & wrap round with sellotape (only joking)

PaulMc81

I done exactly same thing once.. ended up taking the machine apart, noted how the power lead was connected, then re-connected it using the (still good) piece of power lead.

Screwed it all together again and away it went, just had a shorter power lead...

warmhands.coldheart

^^^ Dito... but you need to be at least a bit handy...... Not everyone likes working with electrics......... sort of can kill you if you get it wrong....

Paddy2eyes

Also probably worth investing in a RCD adaptor such as this.http://www.screwfix.com/p/masterplug-rcd-adaptor/63731