We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Advice on fixing rusty bike please

Options
2»

Comments

  • Retrogamer
    Retrogamer Posts: 4,218 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    Just to add to the above, if you want to clean some of the rust off of the bolts / brake parts to make it look a little better a Brillo pad works wonders.
    Just apply a slight smear of Vaseline on the parts after will prevent them rusting again.

    A little spray of WD40 or spray grease around the bearing areas as well wouldn't be a bad idea.
    All your base are belong to us.
  • HappyMJ
    HappyMJ Posts: 21,115 Forumite
    10,000 Posts Combo Breaker
    Although it's looks rusty and awful..it's probably just surface rust. A good scrub and the rust should come off.
    :footie:
    :p Regular savers earn 6% interest (HSBC, First Direct, M&S) :p Loans cost 2.9% per year (Nationwide) = FREE money. :p
  • zaax
    zaax Posts: 1,913 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    As above, just surface discolouration. A good wash and a lube it will be right as rain.
    Do you want your money back, and a bit more, search for 'money claim online' - They don't like it up 'em Captain Mainwaring
  • Jacqu79
    Jacqu79 Posts: 293 Forumite
    Part of the Furniture Combo Breaker I've been Money Tipped!
    Thanks everyone. We changed the chain and tyres, the brakes seem fine, but I'd rather the cables were changed, so we have bought cables to do that.

    My son was out for a short cycle along the cycle path near our home last night to see how it was, and he said it was fine, except the chain slipped off when he was changing gears at one point (not at every gear change though) Any ideas why this would be?
  • MEM62
    MEM62 Posts: 5,307 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    The best way to remove the corrosion is wire wool and WD40. Works a treat!
  • daivid
    daivid Posts: 1,286 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Jacqu79 wrote: »
    My son was out for a short cycle along the cycle path near our home last night to see how it was, and he said it was fine, except the chain slipped off when he was changing gears at one point (not at every gear change though) Any ideas why this would be?

    I assume it was slipping off the chainrings? In which case the best case scenario is that the front gear changer needs adjusting. If you manage to get hold of the Haines manual that will explain much more clearly than I can here, otherwise advice is readily available online. Worst case would be a bent tooth in the chainring however if the chain only slips during changes this is less likely.

    Very detailed bike maintenance advice can be found at sheldonbrown.com , I'm sure someone else will be along to point you towards some more concise guidance.
  • Norman_Castle
    Norman_Castle Posts: 11,871 Forumite
    Part of the Furniture 10,000 Posts Photogenic Name Dropper
    Assuming it came off the front chainrings http://www.bicycling.com/video/adjust-front-derailleur . Lots of other guides. Find one that makes the most sense to you.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.8K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.8K Work, Benefits & Business
  • 598.7K Mortgages, Homes & Bills
  • 176.8K Life & Family
  • 257.1K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.