We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Watch repair in West Midlands/Online

Options
isotonic_uk
isotonic_uk Posts: 351 Forumite
Part of the Furniture 100 Posts Combo Breaker
Hi

I have a Emporio Armani Tazio Rose Tone Case Chronograph Rubber Strap watch.

I just had the battery replaced from a cheap market stall and that was the biggest mistake I made as now 2 of the front pins which serve the sub dials have literally just fallen off and fallen to the bottom. How this has happened I dont know as the market stall guy didnt even access that watch from the front, it was simply a battery replacement but clearly he has moved something which has caused this.

Went back to the stall but they refused to admit that they caused that, so I am now stuck but would like to get my watch repaired.

Does anyone recommend anywhere in the west midlands area or even an online repairer?

Thanks

Comments

  • gardengull
    gardengull Posts: 117 Forumite
    Part of the Furniture Combo Breaker
    http://www.intime.co.uk/watch-repairs-bullring

    I used these people, within Debenhams in the Bullring Birmingham.

    Get a written quote first if the watch isn't worth a small fortune, and if you leave it with anyone for repair, take a photo of it beforehand, and get a receipt which gives a description of the watch.
    Whoops there goes another year, there goes another pint of :beer:
  • Joe_Horner
    Joe_Horner Posts: 4,895 Forumite
    Ninth Anniversary Combo Breaker
    Assuming that by "small pins" you mean the hands for the sub dials then it's quite likely that it was caused by the battery change. If you're heavy handed taking the old one out then you can pull the movement ("workings") away from the dial and that will loosen the hands even if it doesn't pull them right off. The trouble is, proving it will be next to impossible becaue a single drop can have the same effect.

    It's an easy fix as long as the pivots the hands push on to haven't been damaged. I'd quote £5 (£10 with a pressure test after to guarantee water resistance) to refit the hands and zero everything up again. Normally I'd ask about half an hour depending on how busy I was. Bear in mind that we're cheap (Anglesey is a deprived area) but that gives you some idea of how long the job takes and what's reasonable to quote for it.
  • isotonic_uk
    isotonic_uk Posts: 351 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    Joe_Horner wrote: »
    Assuming that by "small pins" you mean the hands for the sub dials then it's quite likely that it was caused by the battery change. If you're heavy handed taking the old one out then you can pull the movement ("workings") away from the dial and that will loosen the hands even if it doesn't pull them right off. The trouble is, proving it will be next to impossible becaue a single drop can have the same effect.

    It's an easy fix as long as the pivots the hands push on to haven't been damaged. I'd quote £5 (£10 with a pressure test after to guarantee water resistance) to refit the hands and zero everything up again. Normally I'd ask about half an hour depending on how busy I was. Bear in mind that we're cheap (Anglesey is a deprived area) but that gives you some idea of how long the job takes and what's reasonable to quote for it.

    Do you accept orders through the post? If so can you PM me. Thanks
  • Joe_Horner
    Joe_Horner Posts: 4,895 Forumite
    Ninth Anniversary Combo Breaker
    You have mail :)
  • isotonic_uk
    isotonic_uk Posts: 351 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    Joe_Horner wrote: »
    Assuming that by "small pins" you mean the hands for the sub dials then it's quite likely that it was caused by the battery change. If you're heavy handed taking the old one out then you can pull the movement ("workings") away from the dial and that will loosen the hands even if it doesn't pull them right off. The trouble is, proving it will be next to impossible becaue a single drop can have the same effect.

    It's an easy fix as long as the pivots the hands push on to haven't been damaged. I'd quote £5 (£10 with a pressure test after to guarantee water resistance) to refit the hands and zero everything up again. Normally I'd ask about half an hour depending on how busy I was. Bear in mind that we're cheap (Anglesey is a deprived area) but that gives you some idea of how long the job takes and what's reasonable to quote for it.

    For anyone who needs a watch repairing I used our very own fellow moneysaver Joe for the repair to my watch and would whole heartly recommend him. Within a few days my watch was repaired and shipped back to me. Thanks Joe!!
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.9K Work, Benefits & Business
  • 598.8K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.