We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
PLEASE READ BEFORE POSTING
Hello Forumites! However well-intentioned, for the safety of other users we ask that you refrain from seeking or offering medical advice. This includes recommendations for medicines, procedures or over-the-counter remedies. Posts or threads found to be in breach of this rule will be removed.Vac attachment stuck on vac hose.
MissMoneypenny
Posts: 5,324 Forumite
Does anyone know any tips on how to release a plastic vac attachment which is stuck on the vac's metal pipe, please?
RENTING? Have you checked to see that your landlord has permission from their mortgage lender to rent the property? If not, you could be thrown out with very little notice.
Read the sticky on the House Buying, Renting & Selling board.
Read the sticky on the House Buying, Renting & Selling board.
0
Comments
-
Have you tried tapping where it's stuck quite hard on the edge of a work surface or similar?
**Thanks to everyone on here for hints, tips and advice!**:D
lostinrates wrote: »MSEers are often quicker than google
"Freedom is the right to tell people what they don't want to hear" - G. Orwell0 -
carolinosourus wrote: »Have you tried tapping where it's stuck quite hard on the edge of a work surface or similar?
Thanks for the reply. Yes I have tried that and it is still stuck.RENTING? Have you checked to see that your landlord has permission from their mortgage lender to rent the property? If not, you could be thrown out with very little notice.
Read the sticky on the House Buying, Renting & Selling board.0 -
Have you tried heating it gently? Or twisting it wearing rubber gloves and holding each bit separately (IYSWIM)?**Thanks to everyone on here for hints, tips and advice!**:D
lostinrates wrote: »MSEers are often quicker than google
"Freedom is the right to tell people what they don't want to hear" - G. Orwell0 -
Have you tried making it cold then hot? Plastic usually contracts when cold and expands when warm. So maybe in the freezer then on a radiator, as with any luck it'll free up the joints. Plastic should heat quicker than the metal does freeing it up.
When you twist it off try using rubber gloves to give you more grip on it.One day I might be more organised...........
GC: £200
Slinkies target 2018 - another 70lb off (half way to what the NHS says) so far 25lb0 -
I had that problem when I didn't use the right connector and I freed it with wd40 and gave it a shoogle and the 2 bits came apart.If you always do what you have always done, you will always get what you always got!0
-
I had that problem when I didn't use the right connector and I freed it with wd40 and gave it a shoogle and the 2 bits came apart.
Exactly what I was going to say, except I didn't know that technical term "shoogle" but I know what it means :rotfl:You never get a second chance to make a first impression.0 -
Thanks everyone. I'll try all that tomorrow and let you know how it goes.RENTING? Have you checked to see that your landlord has permission from their mortgage lender to rent the property? If not, you could be thrown out with very little notice.
Read the sticky on the House Buying, Renting & Selling board.0 -
If you use WD40, don't switch the cleaner on for at least an hour afterwards, just in case the fumes ignite!
(an ex tried spraying a cleaner bag with Lynx because it smelled musty, then switched it on. Let's just say my new cleaner cost him a fair bit that afternoon)I could dream to wide extremes, I could do or die: I could yawn and be withdrawn and watch the world go by.Yup you are officially Rock n Roll0 -
I would try rubbing the edge with cooking oil.If winter comes, can spring be far behind?
Spring begins on 21st March.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 349.8K Banking & Borrowing
- 252.6K Reduce Debt & Boost Income
- 453K Spending & Discounts
- 242.7K Work, Benefits & Business
- 619.5K Mortgages, Homes & Bills
- 176.4K Life & Family
- 255.6K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 15.1K Coronavirus Support Boards