We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide
Pipes or water and radiator
Annie1960
Posts: 3,009 Forumite
The plumber has fitted pipes for water and rad in wetroom. I had expected these to be copper, but they seem to be white bendy plastic.
The next step will be to lay screed., and I will have vinyl on top of this. Are the white plastic pipes OK, or should I ask for these to be changed to copper?
The next step will be to lay screed., and I will have vinyl on top of this. Are the white plastic pipes OK, or should I ask for these to be changed to copper?
0
Comments
-
They'll be fine.0
-
It's called Push Fit. A lot of people use it. It's cheaper and quicker to fit. You'll find it everywhere in new builds.
It's not for me, but if you want copper, expect to pay for it. Some plumbers who use Push Fit may not be able to fit copper.Everything that is supposed to be in heaven is already here on earth.
0 -
The lime in the screed will rot the copper in no time
Plastic should be tube in tube so should a fault occur a new pipe can be drawn through without digging up your floorHi, we’ve had to remove your signature. If you’re not sure why please read the forum rules or email the forum team if you’re still unsure0 -
AndyMc..... wrote: »They'll be fine.
How long can I expect these to last? I don't want to have to dig up the floor.
Will Building Control inspect these?0 -
Doozergirl wrote: »It's called Push Fit. A lot of people use it. It's cheaper and quicker to fit. You'll find it everywhere in new builds.
It's not for me, but if you want copper, expect to pay for it. Some plumbers who use Push Fit may not be able to fit copper.
Hep20 is 3x the cost of soldered copper fittings , I don't believe it'll last 50yrs given the brake pipes of your car which have a lifespan of 10yrs is the same stuff the sealing ring is made off
A plumber that can only fit push fit ain't a plumber !Hi, we’ve had to remove your signature. If you’re not sure why please read the forum rules or email the forum team if you’re still unsure0 -
I'm not a lover of plastic on heating systems, the dirt in the system tends to stick to the inside of the pipe and then breaks off in lumps and creates a tea leaf effect which has a habit of causing blockages and restrictions.
If it's changed to copper and then has concrete over it, it will need to be wrapped or better put in a boxing to protect from corrosion.0 -
My grammar was incorrect. I was saying that Push Fit is not for me. The labour is more intensive with copper and people are differently trained, therefore expect to pay more for copper. The inference that it is used on new builds is that it is cheaper.Everything that is supposed to be in heaven is already here on earth.
0 -
The lime in the screed will rot the copper in no time
Plastic should be tube in tube so should a fault occur a new pipe can be drawn through without digging up your floor
Are you saying there is already a tube within the tube I can see? Or that a new one could be pushed through in the event of a leak in the future?0 -
If this pipe is put in concrete and for some reason it leaks you will not be able to get it out without removing the concrete. Plastic put in concrete should be one continuous piece of pipe so is very unlikely to leak.
If it worries you then get the 15mm plastic to be put inside a bigger plastic pipe so it can be pulled out without removing the concrete.0 -
If this pipe is put in concrete and for some reason it leaks you will not be able to get it out without removing the concrete. Plastic put in concrete should be one continuous piece of pipe so is very unlikely to leak.
If it worries you then get the 15mm plastic to be put inside a bigger plastic pipe so it can be pulled out without removing the concrete.
Best bit of advice I have seen on here for years............
:T:T0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 354.3K Banking & Borrowing
- 254.4K Reduce Debt & Boost Income
- 455.4K Spending & Discounts
- 247.2K Work, Benefits & Business
- 603.9K Mortgages, Homes & Bills
- 178.4K Life & Family
- 261.4K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.7K Read-Only Boards