📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Renewables: "talking 'bout my generation"

Options
12502512532552563825

Comments

  • shafeeq
    shafeeq Posts: 973 Forumite
    Part of the Furniture 500 Posts
    Much better then last few days but aim not good enough. 3.45 kwh today. ..
  • 7.9 kWh today

    Had the Immersion on for nearly an hour, and a halogen heater rest of the day warming the house through.

    Can't beat free electricity use. :p
  • jackieblack
    jackieblack Posts: 10,505 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    4kWh here, a definite improvement on the last few days!
    2.22kWp Solar PV system installed Oct 2010, Fronius IG20 Inverter, south facing (-5 deg), 30 degree pitch, no shading
    Everything will be alright in the end so, if it’s not yet alright, it means it’s not yet the end
    MFW #4 OPs: 2018 £866.89, 2019 £1322.33, 2020 £1337.07
    2021 £1250.00, 2022 £1500.00, 2023 £1500, 2024 £1350
    2025 target = £1200, YTD £9190
    Quidquid Latine dictum sit altum videtur
  • legoman62
    legoman62 Posts: 4,996 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    6.64kWh for me today...much better:D
    Sent FITs meter reading off
    Total = 242kWh

    This 3 months total is 20% down on same period 2011/2012:(
    16 Sanyo Hit 250s.4kWp SMA 3.8kWp inverter. SW roof. 28° pitch. Minimal shade. Nov 2011 install. Hybrid car. Ripple Kirk Hill. N.E Lincs Coast.
  • edwink
    edwink Posts: 3,006 Forumite
    Part of the Furniture 1,000 Posts Homepage Hero Photogenic
    2.28kWh for us today. Not too bad as we still have shading issues from neighbours ruddy trees!!!:mad:

    edwink
    *3.36 kWp solar panel system,10 x Ultima & 4 x Panasonic solar panels, Solaredge Inverter *Biomass boiler stove for cooking, hot water & heating *2000ltr Rainwater harvesting system for loo flushing *Hybrid Toyota Auris car *RIP Pingu, Hoppy, Ginger & Biscuit *Hens & Ducks* chat thread. http://forums.moneysavingexpert.com/showthread.php?t=5282209
  • k66
    k66 Posts: 354 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    6.74 kWh
    Sunny Cheshire :)
    :hello:
  • Oscargrouch
    Oscargrouch Posts: 4,393 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    shafeeq wrote: »
    Much better then last few days but aim not good enough. 3.45 kwh today. ..

    Problems with your sytem Sir ? smiley-laughing021.gif
    edwink wrote: »
    2.28kWh for us today. Not too bad as we still have shading issues from neighbours ruddy trees!!!:mad:
    edwink

    That's what you get for living in the Rain Forest.smiley-happy057.gif(Bet I'm going to get it, smiley wise) :rotfl:
    Anyway on to big big figures----4.2kWh today smiley-laughing013.gif
    During Feb: Meter went up by 87 kWh
    Used: 106.8 kWh
    Equates to 18.54% free smiley-laughing013.gif Thank you EDF & Wattson/Holmes..not forgetting Georgeee Boy :rotfl:
    2.5 kWp PV system, SSW facing, 45 Deg Roof. ABB Inverter, Monitor: 'Wattson'.
    Reg. for FIT Nov 2011. "It's not what you generate; it's how you use it that matters". One very clean Vauxhall Diesel Sri, £30.00 Road Tax: B)

    Definition of 'O's = kWh/kWp (kWh = your daily & accurate Generation figure) (kWp = the rated output of your PV Panels).
  • John_Pierpoint
    John_Pierpoint Posts: 8,401 Forumite
    Part of the Furniture 1,000 Posts
    edited 15 February 2013 at 6:58AM
    I have an inverter with two strings.
    The panels are two rows of portrait and a bottom row of landscape

    Snow tends to slither down onto the landscape and then as it falls off the bottom of the landscape row, it forms a dam as it tries to perch on the skirt of tiles before falling into and over the square section gutter.

    As it is a bungalow, clearing the skirt is no real problem; however this time I got a dam at the bottom of a top row panel; evidently some water had dripped down the crack and refrozen thus keying the snow at the lower edge of the top panel.

    In my shed of junk, in the vintage 1960s section, I found a cobweb brush, with a telescopic handle, similar to the picture below, enhanced by a runner bean cane up its bottom end, it can reach virtually the whole roof:j

    328824.jpg

    Completely off the subject of generation, the "sun" sign below is a "fire mark".
    Before the concept of municipal fire brigades had developed, it was every house owner for themselves (as it still is on the high seas) and to encourage private enterprise the insurance companies would mark the buildings they insured.
    The organisation with a fire pump then knew it would get paid for its efforts (as it rushed past the other buildings to get to the one with a fire mark!)

    Has anyone seen a similar sun image cast in concrete in a local garden centre ?
    [I want to paint one golden and put it on my roof - just how kitch can you get?]
    kfrs_history_object-011_v2_l.jpg
  • Happy system birthday John. My puny 1.75kW system produced 1225kWh, but for a couple of months had pretty bad shading from a now ex-tree. Also I get a bit of shading mid summer from a chimney shadow just covering a small part of a row of panels. I may have a few more trees chopped which are currently shading the panels, but in few weeks the sun will clear those.

    I bought a chimney sweeping/drain cleaning set off ebay to use like you to clear any snow off the panels. Unfortunately, the high ceilinged rooms in my old house mean I doubt when all the rods are assembled that they'll reach. (I haven't tried it yet because as you can imagine, I ordered when it snowed a lot, and it arrived when it had just melted a lot). I did try to blow the snow off wioth my pressure washer, which while it can act more or less like a paint stripper when cleaning the car if set incorrectly, when pointed up at the roof, the jet didn't stay focussed and ended up basically as rain by the time it reached the mogels on the panels. I lost a 5 days of generation due to the snow, which for me at this time of the year equates to about 2kWh in total!
  • John_Pierpoint
    John_Pierpoint Posts: 8,401 Forumite
    Part of the Furniture 1,000 Posts
    edited 15 February 2013 at 10:58AM
    h0unRbDC-U5JvatKNUst_8A39Zg7lVgk6CMg3OnkqXXepxz0dgBQ6RjOKdn1cPnAe-nb72fCFLahtUYXC_SeQvxVAwVw71fH5RLTcSWlFESSzsUpUfu9rSI6Aq8zfX8YiVAhZn9PTOW_4tPBA-UVdKWrgrGLQIlOrODaVzNKd8_N_M1MOiCwO0KdayVRZeyuQql1WvOKxq1U_fRfAt5A1nastZb71mZfDx7TKQ

    I would be careful - can one crack the panels with thermal shock ?

    The drain/chimney rods are an idea but mine have metal fitments and are a lot heavier than a cobweb brush - I think I would wrap a pad round the metal bits for fear of scratching the surface.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.2K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.2K Work, Benefits & Business
  • 599.3K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.