How would you get rid of old oil tank????

Hi All!

Got to move & remove the old steel central heating oil tank. It's behind the garage, on about 10 courses of bricks. No means of getting a vehicle anywhere near, either. It needs to get to the fromt of the house, a journey of 150feet!!

So how would you do it???

Thinking of a grinder & sparks = not too clever...

Gas bottles & flames, same again....

Lots of strong blokes...not got enouigh...

So your input welcome!!

Thanks in advance!

VB
«13

Comments

  • malamute
    malamute Posts: 710 Forumite
    crane2.jpg

    Very expensive solution, i would wash tank out leave open vented and [SIZE=-1]Oxyacetylene[/SIZE] burn / cut apart into manageable sizes to lift and move to the front of the house.
  • HugoSP
    HugoSP Posts: 2,467 Forumite
    How close could you get a 4 wheel drive to it?

    You have the option of pulling it via a long chain/rope whilst using cut up telegraph poles as rollers over the terrain. Even if the towing vehicle is 150ft away, if it has a clear line of site then you can pull it.
    Behind every great man is a good woman
    Beside this ordinary man is a great woman
    £2 savings jar - now at £3.42:rotfl:
  • Sell it! Advertise the tank for sale or even free to collector. These are especially useful for farmers or anyone who keeps red diesel for off road vehicles. They will have the means or man power to remove it.
  • ormus
    ormus Posts: 42,714 Forumite
    drill some holes in the top and use a jigsaw to remove a large piece.
    any oil fumes shouldnt be a problem then. not that oil waste is even a huge problem like petrol is.
    then you can use the angle grinder to cut it up into manageable sections.

    have fire precautions ready. ie water and extinguishers/blanket etc...
    Get some gorm.
  • squoog
    squoog Posts: 562 Forumite
    First Anniversary Combo Breaker
    Is there any oil left in it? we phoned a company in the yellow pages who paid us for the oil and took the tank away ( I guess there is scrap value in it) Might be worth making a few enquiries.
  • vansboy
    vansboy Posts: 6,483 Forumite
    First Anniversary First Post
    There is some oil in it, we'll be pumping this into thenew tank - in theory.

    Will have to avoid any residue, obviously!

    VB
  • HugoSP
    HugoSP Posts: 2,467 Forumite
    I like the idea of advertising it free to a collector.

    Scrap value for that is probably around £20 if that. But as a tank for a farmer etc it may be worth more.
    Behind every great man is a good woman
    Beside this ordinary man is a great woman
    £2 savings jar - now at £3.42:rotfl:
  • Canucklehead
    Canucklehead Posts: 6,254 Forumite
    Good evening: Just curious...why didn't the OFTEC engineer remove the old oil tank as part of your new installation?

    Canucklehead
    Ask to see CIPHE (Chartered Institute of Plumbing & Heating Engineering)
  • HugoSP
    HugoSP Posts: 2,467 Forumite
    Good evening: Just curious...why didn't the OFTEC engineer remove the old oil tank as part of your new installation?

    Canucklehead

    Probably because he couldn't get within 150 feet of the tank either :rotfl:
    Behind every great man is a good woman
    Beside this ordinary man is a great woman
    £2 savings jar - now at £3.42:rotfl:
  • HugoSP wrote: »
    Probably because he couldn't get within 150 feet of the tank either :rotfl:

    Good evening: Experience will find a way;) (and relevant training helps too!)

    Canucklehead
    Ask to see CIPHE (Chartered Institute of Plumbing & Heating Engineering)
This discussion has been closed.
Meet your Ambassadors

Categories

  • All Categories
  • 343.1K Banking & Borrowing
  • 250.1K Reduce Debt & Boost Income
  • 449.7K Spending & Discounts
  • 235.2K Work, Benefits & Business
  • 607.9K Mortgages, Homes & Bills
  • 173K Life & Family
  • 247.8K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 15.9K Discuss & Feedback
  • 15.1K Coronavirus Support Boards